Mon - Fri 7:00 am - 4:30 pm
18553 Arrowhead Boulevard, San Bernardino, California 92407
Why should you choose flat roofing in Los Angeles for your commercial building? Well, you want your building to be energy-efficient, don’t you? Flat roofing helps you achieve this.
Besides that, flat roofing maximizes the useable interior space of your building. And you can use the roof itself as an extra floor. For example, you can set up your HVAC and/or solar panels on this level surface.
Flat roofs are also easy to access for repairs and maintenance. This could be quite convenient when you want to change the signage on your building, too. And, despite all these other advantages, flat roofing is very affordable.
The real question is, why wouldn’t you want all of these benefits? Read on to learn more reasons why you should consider flat commercial roofing in Riverside/Los Angeles.
First of all, flat commercial roofing in Los Angeles is very affordable. Partly, this is because they are easier and safer to install compared to sloped roofs.
Flat roofing systems don’t require excessive amounts of building materials. And the materials themselves are very cheap. The labor doesn’t take long, either.
Also, many of these roofing systems are thin, lightweight membranes. You won’t need to install any structural reinforcement to support these roofs. However, you may need to do this for heavier types of flat roofing, like BUR.
Besides being easy to install, flat commercial roofing in Los Angeles is also easy to maintain. For one thing, flat roofs are much easier to access than sloped roofs.
Most flat roofs can be reached through a hatch at the top of a ladder inside the building. Others are accessed through a door, usually at the top of a flight of stairs.
Rarely, a flat roof requires an external ladder to reach. But even this is not difficult.
The point is, you can easily inspect your flat roof anytime you want or need to. Also, the level surface makes it safer and more convenient to perform any necessary repairs or maintenance tasks. This is especially helpful when it’s time to fully replace your roof.
Most flat roofing systems can be used as an outdoor floor. This floor is suitable for storing or using certain equipment.
For example, many commercial building owners/managers install the HVAC system on the roof. This way, the HVAC doesn’t take up space on the ground beside your building. Plus, being on the roof, it’s out-of-reach to vandals.
Also, most HVACs are connected to a duct system located at the very top of the building, just beneath the roof. So, placing your HVAC on the roof is more practical than placing it at ground level, anyway.
Furthermore, you can install antennas, satellite dishes, and other signal-receiving equipment on your flat roof with little difficulty. Also, consider the signage, inflatable advertisements, and other displays you can place in this area. You can even change these displays throughout the year for seasonally-targeted advertising.
Sloped roofs significantly reduce the amount of useable space inside your building. Specifically, you can only use the space in the middle of the sloped area as an attic for storage.
But you can’t use the space at the edges of this “room.” The slope of the roof cuts through about two-thirds of potential indoor space.
This space could have been used for offices or other actual rooms. And it still can, if you have a flat roof.
Flat roofing doesn’t limit the interior space of your building the way that sloped roofs do. Essentially, this adds a whole extra level to your building.
Of course, one could argue that a sloped roof actually adds useable space to your building. That is, it’s like installing an attic over the area where your flat roof would be.
But this isn’t the case for commercial buildings that are subject to height restrictions. For buildings that reach their maximum allowed height, a flat roof is the only way to maximize interior space.
Sloped roofs also reduce the energy efficiency of your building. Specifically, the sloped attic area traps warm air inside, especially if it’s poorly ventilated/insulated.
This increases your air conditioning costs. And, given the extreme heat of Los Angeles in summer, this added cost is very significant.
Fortunately, flat roofs don’t trap heat this way. Thusly, they improve the energy efficiency rating of your building and save you lots of money. This advantage alone makes them the best and most economical choice for commercial roofing in Los Angeles.
They’re also the best choice for solar energy solutions. For reasons already stated, it’s much easier to install/maintain solar panels on a flat roof than on a sloped roof.
Plus, flat roofs allow for better positioning of your solar panels. That is, you can orient the panels in any direction you like to ensure optimum sun exposure. With a sloped roof, the positioning is limited by the inherent angles of the roof.
Now that you know about the benefits of flat roofing in Los Angeles, it’s time to take the next step. Let us show you what our commercial roofing contractors can do for your business.
HP Roofing Pro is your number one choice for commercial roofing in Orange County and the Los Angeles area in general. Contact us today to get quotes, schedule an appointment, or ask us any questions you might have.
Contact us at The HP Roofing PRO office or submit a business inquiry onlineContact Us